Othala Technology / Custom manufacturing

CNC turning services.

Shafts, sleeves, bushings and other rotational components. The turning review connects diameters, bores, threads and functional fits.

Designing a turned component.

Design topicPractical consideration
Rotational geometryIdentify the outside diameter, bore, length and features that share an axis.
Slender and thin sectionsConsider workholding and support for long, slender parts or thin-wall tubes.
Secondary featuresRadial holes, flats and slots may need additional setups or operations; include their relationship to the turned datums.
Fits and threadsDefine runout, mating fits and thread standards instead of relying on a general tolerance note.

On a small screen, swipe the table to read all columns.

Materials, finishes and inspection.

The documented metal range includes aluminum, stainless steel, titanium, Nitinol and cobalt-chromium. The appropriate alloy and stock condition depend on the component. Engineering polymers and other materials need a separate suitability and sourcing review.

As-machined and controlled edges

Use this route when function takes priority over cosmetic uniformity. Define burr removal, edge breaks, roughness and surfaces that must retain sharp geometry.

Specified finishing

Discuss anodizing for suitable aluminum, polishing or other specified treatments during quotation. Coating thickness, masking and finishing suppliers must be agreed before final dimensional acceptance.

Feature-based inspection

Datums, bearing fits, threads and sealing surfaces need inspection methods that can access and measure them. Agree the report scope and sampling plan with the order.

Compare material considerations →

Accepting a turned component.

Fits along the axis

Identify the bearing seats, shoulders and bores that locate the assembly. State the datum axis and the required relationship between those features.

Features beyond turning

Flats, cross-holes and slots need their own location requirements relative to the turned geometry. Include any secondary operation in the quoted scope.

Edges and threads

Identify thread standards, engagement, reliefs and protected sealing edges. Agree the gauges or measurements required rather than relying on the visual appearance of a sample.

Quality evidence that matches the order.

Agree the drawing revision, critical dimensions, inspection method and required records before production. Dimensional checks can include coordinate measurement, optical inspection and gauges as appropriate to the feature. Material records and inspection reports should be listed in the order scope; a report is not automatically a product certification.

Company and quality information →

Technical guides

Related reading

A clear route to your next part.

Engineering review connects the drawing, manufacturing route and acceptance requirements. Ask for an NDA before sharing confidential information.